volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Cross-Member Bushing|Service and Repair|Page 9239 > < Replacing Trunk Lid Lock Unit, Switch or Motor (4-Door)|Page 9233
Page 1
background image

Front Cross-Member Bushing: Service and Repair

Special Tools

999 5457

Preparation 

Remove the ignition key and lock the steering wheel in the straight forward position.

Remove the front screw from the upper torque rod.

Mark up and remove the steering shaft joint from the steering gear.

Disconnect the wiring harness from the sub-frame.

Front Cross-Member Bushing|Service and Repair|Page 9239 > < Replacing Trunk Lid Lock Unit, Switch or Motor (4-Door)|Page 9233