S70 GLT L5-2.4L Turbo VIN 56 B5244T (2000)
Use drift 999 5449.
Grease seal.
Tap in seal.
The new version of drift 999 5449 is made in plastic.
Install camshaft pulleys
Position the upper timing cover
Install camshaft pulleys, align according to marking.
Tighten the two screws until they just come into contact with the camshaft pulleys.
Lift out the upper timing cover.
Note! Check that the camshaft screw holes are centered, see illustration.
Install camshaft belts
Install tensioner damping unit tighten to 25 Nm.
Place belt over camshaft pulley, around coolant pump and press the belt over the tensioner pulley.
Slacken off the two camshaft pulley screws.
Pull the lock pin out of the tensioner/damping unit.
Press hard or knock the belt twice in the direction of arrow (1) and twice in the direction of arrow (2) using a plastic mallet.
Tighten camshaft pulleys