volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control Arm|Front|Page 7608 > < Ball Joint/Steering Knuckle - Additional R&R Information|Page 7603
Page 1
background image

Control Arm: Service and Repair
Front

Replacing Control Arm (Steel) and / or Control Arm Bushings W/ MT or AT

Control Arm Front, Replacing

Special Tools:
-

998 5434

-

999 5461

-

998 5972

-

951 2050

NOTE: As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustration is correct.

Preparations:

Applies to cars of model years 97-98:

-

Raise the car. 

-

Remove the wheel.

-

Install counterhold 999 5461.

-

Detach the drive shaft end at the hub Tap in the shaft end approximately 10 - 15 mm. Use a plastic or copper mallet or use puller 998 5434
together with 999 5461.

Applies to cars of model years 99-00: 

-

Raise the car.

Control Arm|Front|Page 7608 > < Ball Joint/Steering Knuckle - Additional R&R Information|Page 7603