S70 GLT L5-2.4L Turbo VIN 56 B5254T (1998)
11. Check Conrad (big end) bearing seats:
-
Check bearing shells visually.
-
If any doubt, measure out-of-round.
-
Use dial gauge 999 9639, or equivalent.
Bearing seat diameter:
B 5202-5254: 53.0+0.013 mm
Max. Out-of-round: 0.006 mm
12. Check Conrad in alignment gauge
-
Check for straightness and twisting.
Important:
-
Check that clamping surface of fork is round and free of burrs.
-
Release and tighten expander at big end between each alignment check.
Connecting Rods Bushings, Replacement
13. Press bushing out:
-
Use drift tool No. 999 5309, or equivalent.
-
Use drift the right way round, with the short end downwards.
-
Use drift tool No. 999 2413, or equivalent as counterhold.