S70 GLT L5-2.4L Turbo VIN 56 B5254T (1998)
Transmission Temperature Sensor/Switch: Service and Repair
NOTE: Avoid skin contact with transmission fluid!
1. Preparation
-
Remove:
Battery
Air Cleaner Housing (ACL) complete with intake pipe.
Battery shelf Detach:
ACL bracket.
2. Separation of connector halves
-
Remember rubber gasket.
-
Detach connector from transmission.
-
Remove cable clamps around wiring and rubber seal.
-
Remove sockets from connector casing.
-
Insert screwdriver between casing and socket and press catch in.
At the same time slide the sockets out of the casing.
3. Remove:
-
Remove socket for cables to oil temperature sensor.