S70 GLT L5-2.4L Turbo VIN 56 B5254T (1998)
4. Install the new damper units on the cable bracket as illustrated.
5. Install:
-
Cable bracket assembly on transmission, tighten to: 25 Nm.
-
Selector cables to bracket by clips.
NOTE: The outer mounting and associated selector cable are both marked yellow.
-
Lubricate selector arm pins with grease part No. 1161241-3, or equivalent.
-
Selector cables to selector levers
-
The two washers and two clips
6. Install ACL.
-
Install hoses and connectors
-
Timing valve to ACL (turbo models only).