volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Towing Relay Kit, Brake Lamps|Page 22413 > < Towing Relay Kit, Brake Lamps|Page 22411
Page 16
background image

Illustration C applies to the XC90 

Install the correct fuse / relay depending on the model (year) and desired function

Applies when connecting the fog tail lamp function

-

Install the relay in the rear electronic module, terminal MI 7.

Applies when connecting the automatic shut-off function for the fog tail lamp
Note! This function requires software unique to the car.

Program the software according to the service information in VIDA.
 

Applies when connecting the positive power supply / charging function (15l supply) on the S80 (model year 1999)

-

Install the relay in the rear electronic module, terminal MA 1.

Note! The relay is already installed in MA1 on cars with all wheel drive and cars with reverse warning as an accessory.

-

Install a 15 A fuse in the rear electronic module, terminal 9.

 

Applies when connecting the positive power supply / charging function (15l supply) on the S80, S60, V70 (00-) and XC90 

-

Install the relay in the rear electronic module, terminal MA 1.

Note! The relay is already installed in MA1 on cars with all wheel drive and cars with reverse warning as an accessory.

-

Install a 20A fuse in the rear electronic module (REM), terminal 15, and a 15A fuse in terminal 9.

Applies to the S80/S60 manufactured before week 38-2001 without positive power supply 

-

Remove the two relays in terminals MI 6 and MI 4. Replace them with new relays with P/N 8651661. The third relay must not be used for these
cars.

Applies to the V70 (00-) manufactured before week 48-2001 without positive power supply 

-

Remove the three relays in terminals MI 6, MI 5 and MI 4. Replace them with relay P/N 8651661 in terminal MI 6 and MI 4 and relay P/N
8663490 in terminal MI 5.

Towing Relay Kit, Brake Lamps|Page 22413 > < Towing Relay Kit, Brake Lamps|Page 22411