S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Raise the car.
Remove the rear wheels.
Drill using a 6 mm diameter drill bit.
Drill out the rivets.
Bumpers
Remove the bumper by pulling it straight backwards.
Place the bumper on an underlay that will not damage the paint.
Replacement
Replacing casings
Note! Do not damage the antenna connection when disassembling and assembling the bumper.
Disconnect the four clips (1) on the inside of the upper edge of the bumper.
Open the ten outer and the four inner lock facings (2) in the upper edge.
Open the lower lock facings (3).