volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Subframe|Service and Repair|Page 23022 > < Rear Subframe|Service and Repair|Page 23020
Page 6
background image

Remove:

-

the 2 screws for the shock absorbers on both sides

-

the shock absorbers from both the control arms.

Remove the tensioner strap.

Removing the position sensors

Cars equipped with Bi-Xenon lamps or Four-C. Remove. See Position sensor suspension rear (Four-C), replacing See: Sensors and Switches/Sensors and
Switches - Steering and Suspension/Sensors and Switches - Suspension/Ride Height Sensor/Service and Repair.

Removing the track rods, lateral links and control arms

Remove:

-

the tie rod

-

the lateral link

-

the lower control arm

-

the link for the inner mounting for the control arm

-

the link for the anti-roll bar on the upper control arm.

Use a Torx wrench as a counterhold so that the boot is not damaged.

Removing the anti-roll bar

Rear Subframe|Service and Repair|Page 23022 > < Rear Subframe|Service and Repair|Page 23020