S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Press the final drive up against the sub-frame.
Install:
-
the 8 screws in the sub-frame cover. Tighten the screws alternately. See Tightening torque See: Specifications/Mechanical
Specifications/Steering/Tightening Torque
-
screws, 2 x M12, front final drive mounting.
Install the propeller shaft.
Remove:
-
the hose clamp around the pipe and plate
-
remove the jack.
Note! Do not install the exhaust pipe yet.
Installing the anti-roll bar