S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install:
-
the M6 screw for the locating pin and the brake disc
-
the brake caliper. Use new screws. See Tightening torque See: Brakes and Traction Control/Specifications/Tightening Torque
-
the ABS sensor, 1 x M6.
-
the ABS line on the holder on the wheel spindle.
Tightening the drive shafts
Install the M10 screw for the drive shaft. Tighten. See Tightening torque See: Specifications/Mechanical Specifications/Steering/Tightening Torque.
Install the wheels. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
Align the wheels. See Wheel alignment, checking / adjusting See: Maintenance/Alignment/Service and Repair.
Finishing
Installing the mudguards