S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Rear Door Weatherstrip: Service and Repair
Installing Components
Installing components
Installing components
Note! Avoid touching visible components or components that come into contact with windows with lubricant
Installing the weatherstrips, windows
Lubricate the outside of the parts of the strip that lower into the door. Use soap for example.
Install the weather strip at the rear rail. Feed the strip down into the door. Check that the rear upper corner of the strip aligns in the rear upper corner of
the window without having to stretch or press the strip together.
Continue to apply the weatherstrip to the window frame up to the front rain.
Install the weatherstrip in the front rail and then at the front corner.
The same procedure applies to both the front and rear corners.
Check that the side window can raised and lowered without resistance.
Install:
-
the outer weatherstrip according to Weatherstrips and trim strips See: Front Door Weatherstrip/Service and Repair/Weatherstrips and Trim Strips
illustration 1
-
weatherstrip, rear side door according to Weatherstrip See: Front Door Weatherstrip/Service and Repair/Weatherstrip.
Raise the window fully
-
panel, rear side door according to Panel, rear side door, replacing See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and
Repair.
Check the following:
-
the power window mechanism
-
the adjustment of the door mirror
-
the operation of the lock.