S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Note! The ABS hydraulic modulator is filled with brake fluid. It is important that the plugs are not removed until the brake pipes are to be
connected.
Install the new ABS hydraulic modulator
Install the new ABS hydraulic modulator on the bracket. Tighten the mounting screws. Tighten to 8 Nm.
Hold the vacuum hose to one side and carefully install the bracket in the car (the hose between the bracket and the side member).
Connect the pump motor connector to the control module. Tighten the mounting screws. Tighten to 8 Nm.
Installing the ABS hydraulic modulator, continued