S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Lubricate the locating pins (2) using grease. P/N 1161325-4.
Insert the locating pins into the rubber sleeves. The pins should slide into the sleeves easily.
Secure the brake hose (4) loosely in the caliper.
Install:
-
a brake pad in the piston
-
the other pad in the caliper holder
-
the brake caliper. Tighten the locating pins to 30 Nm
-
the securing springs (3)
-
the protective caps (1).
Tighten the brake hose. Tighten to 16 Nm.
Fill and bleed the brake system
See Brake system, bleeding (using bleeding unit) See: Brake Bleeding/Service and Repair/Brake System, Bleeding (Using Bleeding Unit).
Pressure test the brake system