S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Secure the pedal in the depressed position. Use a pedal jack.
Remove the protective cap from the bleed nipple at the left front wheel.
Install a plastic hose on the nipple.
Open the bleed nipple.
Collect the brake fluid in a container (bottle).
Shut the bleed nipple.
Preparations for removal of the ABS hydraulic modulator
Remove plastic cap and positive cable nut
See Brake pipe master cylinder / ABS unit, replacing See: Brake Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.
Remove the integrated relay / fusebox. Remove the connector for the ABS unit
See Replacing the brake pipe between the hydraulic unit, front wheel and junction See: Brake Hose/Line/Service and Repair/Brake Pipe Hydraulic Unit /
Junction / Front Wheel, Replacing.
Remove the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Brake Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.
Remove the brake pipes between the master cylinder and the ABS unit
See Brake pipe master cylinder / ABS unit, replacing See: Brake Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing.
Remove the ABS hydraulic modulator with its bracket