S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
The cable terminal is 1.6 Pin.
-
Use strip length 3 to 4 mm and strip the cable as described in Cutting and checking a cable Stripping the cable .
-
Use crimp tool (green) p/n981 4226 Crimping tool See: Tools and Equipment/981 4226 Crimping Tool and crimp the cable terminal as described
in Terminal crimping in general Cable terminals - crimping core wings Choice of crimp tool Crimping a cable terminal .
Insert the new cable terminal in housing
Note! The housing secondary locking must be open as in Open the pin housing.
-
Insert the new cable terminal in pin housing from the cable side in the correct cavity. A "click" indicates that the catch has engaged.
Close socket housings