S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Disconnect the throttle body (TB) connector.
Remove the 4 screws for the throttle body (TB).
Remove the throttle body (TB) and the gasket. Clean the mating surfaces thoroughly.
Installing the throttle body (TB)
Install:
-
the throttle body (TB). Use a new gasket. Tighten. Connect the throttle body (TB) connector
-
the pipe between the throttle body (TB) and the charge air cooler (CAC)
-
the intake manifold between the front cover plate and the air cleaner (ACL) housing
-
the battery negative lead. Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Note! After replacing the throttle unit, the throttle unit must be adapted using the vehicle communication input: "Adaptation of the electronic
throttle unit".
Remedy as necessary.
Replacing the Throttle Body (TB)
Replacing the throttle body (TB)
Removing the throttle body (TB)