S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Press out the wheel spindle. At the same time pull the drive shaft from the transmission.
Hang the drive shaft from a hook 999 5045 COMPRESSION HOOK See: Tools and Equipment/999 5045 Compression Hook.
Note! Take care not to damage the drive shaft boot.
-
the nut on the ball joint. Use a Torx wrench as counterhold
-
wheel spindle.
Installing the wheel spindle
Install
-
the wheel spindle on the trailing arm
-
a new nut on the ball joint. Tighten. See: Tightening torque See: Specifications/Tightening Torque. Use a Torx wrench as a counterhold.
Note! Make sure that the mating surfaces on the ball joint and link are clean.