S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Steering Control Module: Service and Repair
Steering wheel module (SWM), replacing
Removal
Steering wheel module (SWM)
Remove the steering wheel and steering column covers. See Replacing the steering column covers See: Steering Column/Steering Column Cover/Service
and Repair
Remove:
-
2 screws
-
the connectors
-
the control module with stalks and the contact reel by releasing the catches on the underside
-
The windscreen wiper and indicator lamp stalks. See Washer / wiper switch, replacing See: Sensors and Switches/Sensors and Switches - Wiper
and Washer Systems/Wiper Switch/Service and Repair and Turn signal switch, replacing See: Lighting and Horns/Sensors and Switches - Lighting
and Horns/Turn Signal Switch/Service and Repair
-
the contact reel. See Contact reel / steering wheel angle sensor, replacing See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral
Cable/Service and Repair/Contact Reel / Steering Wheel Angle Sensor, Replacing
The control module is now exposed.
Installation
To install, reverse the removal procedure
Programming the control module
Program the control module according to the table below.
Note! Vehicles up to and including model year 2004 must be loaded with Steering wheel module (SWM) software. Vehicles from and including
model year 2005 must only be loaded with Steering wheel module (SWM) software if the vehicle has DSTC.