S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Control Arm Bushing: Service and Repair
Bushing Inner Control Arm Upper, Replace
Bushing inner control arm upper, replace
Special tools:
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
999 7017 Socket set rear axle See: Tools and Equipment/999 7017 Socket Set Rear Axle
999 7031 Locating pin See: Tools and Equipment/999 7031 Locating Pin
999 7031 Locating pin See: Tools and Equipment/999 7031 Locating Pin
999 7032 Sleeve See: Tools and Equipment/999 7032 Sleeve
999 7033 Sleeve See: Tools and Equipment/999 7033 Sleeve
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7036 Drift See: Tools and Equipment/999 7036 Drift
999 7037 Connecting rod M14X400 See: Tools and Equipment/999 7037 Connecting Rod M14X400
999 7038 Drift See: Tools and Equipment/999 7038 Drift
999 7039 Connecting rod M16X360 See: Tools and Equipment/999 7039 Connecting Rod M16X360
999 7040 Drift See: Tools and Equipment/999 7040 Drift
999 7041 Screw MC6S M12X70 See: Tools and Equipment/999 7041 Screw MC6S M12X70
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12
Preparations
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparations
Remove: (not AWD)
-
the cargo compartment carpet
-
the seal above the shock absorber mounting on both sides.
Remove the two screws for the spring seat mounting on both sides.
Raise the car.