S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove:
-
the gear selector cables at the levers. Use tool 999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar
-
the cable sleeves from the brackets by moving the sleeves back on the cables.
Removing the center console
Remove the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing.
Removing the rubber lead-in
Fold and roll the carpet under the accelerator pedal (AP). Fold and roll the carpet under the accelerator pedal (AP).
Remove the two nuts for the grommet for the gear selector cables at the firewall. Pull the gear selector cables approximately 10 cm into the passenger
compartment.
Hint: Route the gear selector cables correctly in the engine compartment with the assistance of another person.
Removing the gear selector cable from the ball joint
