S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Note! The gear selector knob may be reused a maximum of four times
Press the gear selector knob so that it locks in the lever.
If necessary: Use a sheet plastic hammer and a shim to carefully hit the knob down on to the gear selector lever.
Pull the locking sleeve with the boot straight up so that it locks on the knob.
Check
Check that the lock function operates in its positions.
AW50/51 Transmission
Gear selector lever assembly Geartronic, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Removal
Removing the center console
V70R (B5254T4 engine)
Remove the center console. See.
V70 (other engines)
Remove the center console. See(-2004) or(2005-).
V70XC/XC70
Remove the center console. See(-2004) or(2005-).
S80
