S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install:
-
the gear selector assembly to the bodywork. Tighten to 25 Nm
-
the cable to the gear selector. Secure the cable with the catch
-
cable on the gear selector nose
-
the key lock cable to the gear selector assembly. Place the cable in the extracted locking sleeve.
Installing the gear selector assembly stop
Install the gear selector assembly stop. See Printed circuit board gear selector assembly/top panel Geartronic, replacing See: Printed Circuit Board Gear
Selector Assembly/Top Panel Geartronic, Replacing.
Installing the top panel on the gear selector assembly
Install the top panel. See Printed circuit board gear selector assembly/top panel Geartronic, replacing See: Printed Circuit Board Gear Selector
Assembly/Top Panel Geartronic, Replacing.
Installing gear selector knob
Install the gear selector knob. See Gear selector knob, Geartronic, replacement See: Gear Selector Knob, Geartronic, Replacing.
Initial setting of the key lock cable (adjusting)
