S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Tighten to 25 Nm.
Install:
-
the mechanical cable to the gear selector. Secure the cable with the catch
-
the cable to the end of the gear selector assembly
-
the key lock cable to the gear selector assembly.
Place the cable in the extracted locking sleeve the cable will be adjusted).
Initial setting of the key lock cable (adjusting)
See Key interlock cable, initial setting and adjustment See: Shift Interlock/Shift Interlock Cable/Service and Repair/Procedures.
Installing the top panel on the gear selector assembly
Install the top panel and boot. See: Printed circuit board gear selector assembly/top panel, replacing, B5254T2, AW55-50/51SN See: Printed Circuit
Board Gear Selector Assembly/Top Panel, Replacing.
Installing gear selector knob
Install the gear selector knob. See: Gear selector knob, replacing, B5254T2, AW55-50/51SN See: Gear Selector Knob, Replacing.
Installing the center console
S60R (B5254T4 engine)
Install the center console. See.
S60 (other engines)
Install the center console. See(-2004) or(2005-).
AW55-50 / AWD50 Transmission
Gear selector lever assembly, replacing