S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Flex Plate: Service and Repair
Carrier Plate
Replacing the carrier plate
Special tools:
999 5112 GEAR SECTOR See: Tools and Equipment/999 5112 Gear Sector
999 5678 Special screw See: Tools and Equipment/999 5678 Special Screw
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Removal
Preparatory work
Remove the transmission according to Gearbox, removing See: Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Gearbox, Removing.
Removing the carrier plate
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Block the carrier plate using gear sector 999 5112 GEAR SECTOR See: Tools and Equipment/999 5112 Gear Sector.
Remove:
-
all screws
-
the carrier plate
-
gear sector999 5112 GEAR SECTOR See: Tools and Equipment/999 5112 Gear Sector.
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.
Installation
