S80 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Lubricate the ball on the link arm using grease
-
Install the 3 screws for the windshield wiper motor
-
Position a wrench as support between the link arm and the bracket and screw head. See illustration
-
Position the control arm on the ball. Carefully tap the control arm into place. Use a sleeve and a mallet.
Windshield wiper mechanism
-
Lubricate the lug using a soap solution
-
Install the mechanism in the correct position
-
Tighten the screws
-
Connect the connectors
-
Tighten the screws. Tighten to 20 Nm. Start with the outer screw (closest to the front fender)
-
Install the panel over the wiper mechanism
-
Reset the wiper motor and mechanism by switching on the ignition and then turn the wiper switch on and off
-
Install the wiper arms. See Windshield wiper arms.
Windshield wiper arms