S80 L6-2.9L VIN 92 B6294S2 (2004)
Indicators/Instrument Cluster / Carrier/Service and Repair/Driver Information Module (DIM), Replacing
-
Route the antenna cable from the audio control module to the cable duct (1) behind the combined instrument panel
-
Reinstall the audio control module loosely. Lightly pull and shake the antenna cable to ensure that it does not cause a noise. In case of noise use
foam rubber (P/N 9128331)
-
Remove the hood lock control. See Mechanism, hood release, replacing See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch/Service
and Repair/Mechanism, Hood Release, Replacing. Route the antenna cable with the other wiring down to the left-hand front sill trim panel
-
Remove the front and rear sill trim panel on the left-hand side. See The front sill trim panel and The rear sill trim panel . Route the antenna cable
along the cable ducts in the door sills to the antenna amplifier in the left-hand D-post
-
Secure the antenna cable at the existing wiring and cable ducts using tie straps
-
Reinstall the audio control module, combined instrument panel, panels, hood lock control and sill trim panels.