S80 L6-2.9L VIN 92 B6294S2 (2004)
Positive Crankcase Ventilation: Procedures
Crankcase ventilation, cleaning
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Removing
Remove the screws, x 10, at the intake pipe mating flange.
Lift off the upper section of the intake pipe.
Install999 5723 Cap See: Tools and Equipment/999 5723 Cap.
Remove:
-
the dipstick tube
-
the thick hoses, 2 x, from the T nipple.
Cleaning
Disconnect the hose with the T nipple from the intake pipe.