S80 L6-2.9L VIN 92 B6294S2 (2004)
For a single row of cavities the terminal removal tool is inserted in the open groove on the upper side for each terminal.
Press the cable terminal forwards in the cavity.
Insert the terminal removal tool end between the cable terminal locking tabs and extract the cable terminal.
Double cavity row
For a double cavity row the terminal removal tool is inserted from the contact side in the upper row of cavities for the terminal to be extracted.
The lower cavities are used to fasten the cable terminals in place.
Press the cable terminal forwards in the cavity.
Insert the terminal removal tool and extract the cable terminal.
Proceed to
-
Proceed to chapter New cable terminal See: Diagrams/Diagnostic Aids/New Cable Terminal Seal sws and plug for instructions about how to
crimp a new cable terminal.
New Cable Terminal