volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Tilt Wheel Handle > < Steering-Column Lock Replacement|Page 15177
Page 7
background image

-

Install the lower steering column cover.

Note! Ensure that no wires become jammed.

-

Install the screws for the lower steering column cover.

-

Fold down the upper steering column cover and press tight its snap-in attachments into the lower steering column cover.

Note! Ensure that the gaiters around the control levers are correctly positioned against the column covers.

Follow-on work

-

Adjust the position of the steering wheel and close the locking device for adjustment of the steering wheel position.

Ordering software/key

Note! To install the key, the key and the software must be ordered. To erase the key, only the software needs to be ordered.

Order the key and/or software as described in 9438428.

Programming the key in the control unit

Note! If the key and/or software are accessible, programming/erasing can be done.

If a new key has been installed, check the function.
Use VIDA vehicle communication to check that no diagnostic trouble codes have been stored during the work.

Doing a function check

-

Test-start the engine.

Tilt Wheel Handle > < Steering-Column Lock Replacement|Page 15177