S80 L6-3.2L VIN 98 B6324S (2007)
Applies to vehicles without pre-drawn wiring harness
-
Take the green connector that is taped to the car's cable harness under the left-hand tail lamp.
-
Connect the adapter cable.
-
Clamp the connectors securely.
Applies to cars with installed trailer module (TRM), without pre-routed cable harness
-
Disconnect the green connector on the trailer module (TRM).
-
Connect the adapter cable in the connector and on the control module.
-
Clamp the connectors securely.
Applies to vehicles without pre-drawn wiring harness
-
Route the cable harness along the existing cable harness at the rear crossmember. Secure using three tie straps.
-
Connect the connector to the control module.
Reinstall:
-
the side panels
-
the sill trim panel
-
the floor carpet
-
Fold up the backrest.
