S80 L6-3.2L VIN 98 B6324S (2007)
-
Use holesaw bit part.no 9997241 (-28.6 mm (1 1/8")), and enlarge the hole.
-
File down the edges of the holes.
-
Remove any swarf.
-
Apply primer part no. 9437350 around the hole edges and allow to dry.
-
Disconnect the connector for number plate lighting.
-
Remove the trunk lid's trim strip by carefully prying it off from the trunk lid and number plate lighting's panel. It is securely fastened and will
eventually break. New strip included in the kit.
-
Remove any tape residue from the trunk lid by heating the steel with a hot air gun. Do not heat above 80° C.
