S80 L6-3.2L VIN 98 B6324S (2007)
Auxiliary Input / Output Jack: Testing and Inspection
Checking AUX-Panel
Checking AUX-panel
Reading off diagnostic trouble codes (DTCs)
Remove the equipment that is connected to the AUX-panel.
Connect special tool to the AUX-panel.
951 2989 Aux plug See: Tools and Equipment/951 2989 Aux Plug
Click the VCT2000 symbol to read diagnostic trouble codes (DTCs).
Checking for the fault
If possible, check if the customer's symptom remains.
Checking the wiring
Check the cables for short-circuit to voltage, short-circuit to ground and open circuit. For further information, see the wiring diagram.
If no malfunction is found, replace the AUX-panel.
Other information
-
Diagnostic trouble code (DTC) information IAM-B1D7811 See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/B Code Charts/B1D78/B1D7811 (Integrated Audio Module -
IAM)/Diagnostic Trouble Code (DTC) Information
-
Diagnostic trouble code (DTC) information IAM-B1D7812 See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/B Code Charts/B1D78/B1D7812 (Integrated Audio Module -
IAM)/Diagnostic Trouble Code (DTC) Information
-
Diagnostic trouble code (DTC) information IAM-B1D7813 See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/B Code Charts/B1D78/B1D7813 (Integrated Audio Module -
IAM)/Diagnostic Trouble Code (DTC) Information
-
Checking wiring and terminals See: Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals
Was a fault detected?
Yes - Fault Found
No - Fault-tracing information
-------------------------------------------------
Fault-tracing information
