S80 L6-3.2L VIN 98 B6324S (2007)
-
Remove the sill trim panel by first pulling it forward until the clips in the front edge release. Then pull it upward until the clips in the top edge
release.
-
Remove the seat cushion by pulling it up at the front edge on both sides, it is secured by two holders on the lower side.
-
Fold the backrest forward.
-
Remove the seatbelt from the guide (1) on the side bolster.
-
Insert a hand from the side of the upper section of the side bolster. Press in the catches properly and jerk the upper edge of the bolster so that the
two catches on the other side release. Lift the bolster from the mounting at the lower edge.
