S80 L6-3.2L VIN 98 B6324S (2007)
-
Loosen the upper ground screw on the left side in the rear trunk. If the car is equipped with trailer hitch, a ground cable is already installed.
-
Connect the ground cable from cable harness B and tighten the screw with 10 Nm (7.5 lb ft).
-
Place the ground cable behind the cargo lashing eye.
Applies to cars without pre-wired connector for 12V socket
-
Loosen the upper ground screw on the left side in the rear trunk. If the car is equipped with trailer hitch, a ground cable is already installed.
-
Connect the ground cables from the cable harnesses B and C and tighten down the screw with 10 Nm (7.5 lb ft.).
-
Place the ground cables behind the cargo lashing eye.
A
-
Get the relay holder with bracket and relay in cable harness A and pres into the bracket in the rear module.
-
Clamp the cable to the relay and the cable that was connected on the back of the module RJB B with strip clamp to the thick cable harness to the
modules.
B
