S80 L6-3.2L VIN 98 B6324S (2007)
If a careful visual inspection does not reveal any faults, check the tension of the female pins by using male pin PN 30656636.
TCM locked/stuck/off-line during software downloads:
The TCM can occasionally become locked, stuck or stop communicating during a software download. When this happens, the lights on the shifter will be
out & the gear position will not be displayed in the DIM. This happens most commonly during a TCM Upgrade, but could happen during other
downloads as well. To recover the TCM, perform a CEM reload, then a TCM reload.
TCM failures:
Any one or combination of the following DTCs indicates a faulty TCM: P096100, P096500, P096900, P273700, P271900, P272800.
Auxiliary cooler, XC90 V8:
XG90 V8 customers in very hot climates who are towing a trailer or making repeated accelerations may wish to add an additional transmission oil cooler
(PN 30776304).
Installation instructions are found in VIDA (Repair > Installation Instruction, Accessories > Group 26).
Excessive rustproofing: appearance of oil leakage: