S80 L6-3.2L VIN 98 B6324S (2007)
-
Remove the two screws.
-
Remove the seven screws.
-
Cut off the glovebox lighting tie strap, on the reverse of the glovebox.
-
Pull the glovebox out slightly and disconnect the gray connector on the rear side.
-
Remove the glovebox.
-
Move the carpeting aside. Make a cut in the thick insulating mat starting level with the blue connector of the central electronic module (CEM) and
then continue straight down.
-
Move aside the insulating mat to access the grommet.
