S80 L6-3.2L VIN 98 B6324S (2007)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
Parking assistance, rear
Note! During installation, the car and components must maintain a temperature of at least +20° C (68° F).
Preparations
-
Take the 4 x sensors from the kit.
-
Clean the surfaces as illustrated on the sensors using a cleaning cloth part no. 9192678.
-
Allow to dry.
-
Apply a thin even layer of activator, P/N 8637076, to the cleaned surfaces and allow to dry for at least 10 minutes and for a maximum of 30
minutes before painting.