S80 L6-3.2L VIN 98 B6324S (2007)
INTRODUCTION
-
NOTE: Read through the whole installation instruction before starting the work.
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
Decor panel, exterior
NOTE:
-
Some steps in these installation instructions are presented with illustration only.
-
The surface must be kept at a temperature of at least 15 Degrees C (60 Degrees F). Leave the vehicle indoors for 2 hours after finishing the work.
Do not wash the car for 48 hours.
-
Paint those parts of the doors' new moulding strips that are positioned directly against the doors of the car the same colour as the car according to
the applicable regulations.