S80 L6-3.2L VIN 98 B6324S (2007)
-
Pry the catches to one side around the lower grille and press out towards the radiator.
-
Take the grille out.
-
Carefully pry up the tabs on the upper and lower side of the sensor holders using a small screwdriver, so that the catches on the sensor release and
the sensor can be pulled out.
-
Carefully press in the catches on the lower and upper side of the sensor holder and press out.
-
Repeat steps 9-10 for the sensor on the other side.
-
Remove the grille. It will not be used again.