S80 L6-3.2L VIN 98 B6324S (2007)
Preparations
-
Remove the four screws in the rear edge of the rear wheel housings on the right and left-hand sides.
-
Remove the two screws in the lower edge of the bumper cover.
-
Pull out the corner and continue to pull the bumper cover away backwards until the five clips at the side and under the rear lamp have released.
-
Repeat the operation on the other side.
-
Remove the bumper cover by pulling it backwards until the three catches opposite the tailgate opening have released.
-
Remove the connector for park assistance if applicable.