S80 L6-3.2L VIN 98 B6324S (2007)
-
Position the rear end panel of the net against the rear edge of the side panel and position the front end panel against the side of the side panel so
that the moveable part of the cargo compartment mat does not catch the rear net end when it is raised.
-
Use a pen to make a mark on the tape strip through the holes in the clips.
-
Press a scriber through the markings on the tape strip and through the panel to create holes about diameter 4.8 mm (3/16") in diameter.
NOTE: Check the back of the panel to ensure that no cables could be damaged when the holes are made.
-
Remove the tape strip.
