volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Antitheft - No Start/DTC's/Alarm Triggers When Entering|Page 26680 > < Antitheft - No Start/DTC's/Alarm Triggers When Entering|Page 26678
Page 7
background image

Install 4 pieces of felt tape, PN 9182432, on top of each damper cap.
After installation, reinstall the black dirt protection.

Test drive the car to see if the noise was rectified.

Alternative 2: Replace damper caps. If a critical customer rejects the felt tape solution, it may be required to replace the damper caps. Installing these
will solve the noise but the repair will take longer time since the complete front struts have to be removed from the car.

Remove front struts from vehicle according to VIDA.

INFORMATION
REPAIR
Removal, replacement, and Installation
Springs and wheels

Shock absorber
Shock absorbers, anti-roll and bar leveling
Shock absorber front

Replace damper caps.

Damper cap SID (standard chassis),
P/N31304118 (2x)
Damper cap CCD (4C Active Chassis),
P/N31304119 (2x)

Antitheft - No Start/DTC's/Alarm Triggers When Entering|Page 26680 > < Antitheft - No Start/DTC's/Alarm Triggers When Entering|Page 26678