S80 L6-3.2L VIN 98 B6324S (2007)
Electric engine heater, 110 V, 6-cyl
Applies to the S80
-
Remove the left-hand cover panel under left-hand headlamp by first carefully prizing loose the right-hand end face until the four clips on the inside
release, following which, pull it out to the right.
Note! Do not damage the paintwork.
-
Remove the engine splash guard.
-
Drill out the marked hexagonal surface and cut/file until it is level at the edges.
-
Drill a - 8.5 mm (21/64 ") diameter hole in the hexagonal surface (1) approximately as illustrated.