S80 L6-3.2L VIN 98 B6324S (2007)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
Cooler, integrated in rear seat
Note! The work is done in the same way on left-hand and right hand drive car. Left-hand drive is shown. In case the work differs, right hand
drive version is also shown.On cars with pre-wired connector to 12V socket (two-pin black connector located under right tail light), the cable
harness A and B in the kit shall be used. On cars without this connector, use all three cable harnesses in the kit.
Preparations
Applies to all models
-
Open the boot lid/tailgate.
-
Undo the catches and slide the cover forwards.
