S80 L6-3.2L VIN 98 B6324S (2007)
The only function of the clock is to display the time in hours and minutes. The clock is integrated in the display in the tachometer.
Information is transmitted from the central electronic module (CEM) (4/56) to the driver information module (DIM) (5/1) via the controller area network
(CAN).
The customer can adjust the time using a knob at the bottom of the driver information module (DIM). During adjustment, the driver information module
(DIM) transmits the new time to the central electronic module (CEM). The central electronic module (CEM) registers the change and updates its clock
accordingly.
The customer can select the way in which the time is displayed:
-
12 hour clock. The time is automatically displayed with AM or PM
-
24 hours clock.
Seat belt reminder
The seat belt reminder reminds the driver to put on the seat belt. There are three versions of the seat belt reminder:
-
European
-
American
-
other countries.
The difference between the two is described below. The signals which indicate the variant (European, American or other) are transmitted by the central
electronic module (CEM) (4/56) via the control area network (CAN).
If the seat belt is not fastened, this is indicated to the driver, partly by two small symbols lighting up by the roof lamp. Partly by a sound from and a
symbol lighting in the driver information module (DIM) (5/1).
European version (applies up to and incl. structure week 200650)
All the seats in the vehicle are monitored.
If the driver's seatbelt and/or front passenger seatbelt are not buckled when the ignition is turned on, the symbols will light up. An audible signal will also
be heard from the Driver information module (DIM) when the vehicle speed is above 10 km/h. The audible signal's frequency is increased at speeds over
25 km/h, and at speeds over 40 km/h the volume is also increased. This continues until the seatbelt is buckled, speed is below 5 km/h, or reverse is
engaged.
For the backseat there is status monitoring that generates various text messages depending on which belts are buckled. These messages are turned off 30
seconds after the vehicle has reached a speed above 10 km/h.
If a backseat belt is unbuckled a warning message is lit on the Driver information module (DIM) and in the overhead console and an audible signal will
be heard if speed is above 10 km/h. The sound and light signal and text messages can be removed with the Read-button on the steering wheel stalk.
European version (applies from and incl. structure week 200651)
All the seats in the vehicle are monitored.
