S80 L6-3.2L VIN 98 B6324S (2007)
-
Press the cable along the edge of the wheel housing with clips in positions that ensure the cable is routed in the best possible way.
Illustration A
Applies to the right-hand side and to cars with a fuel heater.
-
Take two tie straps with edge clips from the kit and press one onto the panel edge at the front edge of the sill. Press the other further back on the
sill's plate edge to keep the cable away from the fuel heater's exhaust pipe.
Illustration B
Applies to the right-hand side and to cars without a fuel heater
-
Take a tie-strap with edge clips from the kit and press it on the panel edge at the front edge of the sill.
-
Secure the cable with the tie strap.
