volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 29576 > < Reading and Clearing Diagnostic Trouble Codes|Page 29574
Page 1
background image

Trailer Lighting Module: Programming and Relearning

Downloading software and replacing the control module

A new Trailer module (TRM) will not be pre-programmed, software must always be downloaded.
New software can be downloaded to a previously installed control module.
It is important that the correct part number is used when downloading software. This is so that the correct software is obtained and for full control
module function. The part number corresponds to the type of output that is on the cable harness for the tow hitch.

Reading and Clearing Diagnostic Trouble Codes|Page 29576 > < Reading and Clearing Diagnostic Trouble Codes|Page 29574