S80 L6-3.2L VIN 98 B6324S (2007)
Apply the sealant in the joint between the cylinder head and valve cover.
Use: Chemical gasket, 1161059.
4.
Installation:
Caution!
Do not push the plug in with your fingers as this can deform the plug. Install the sealing plug, see:
Removal, replacement and installation
Engine with mountings and equipment
Engine
Transmission
NOTE:
Carefully press or tap the cam plug in a further 0.7mm (.027in) so the inner edge of the bevel is exposed. Use: Ring, 9997140.
Reinstall engine bracket and upper torque rod.
Make sure engine oil level is at the full mark.
Warranty Claim Information