volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness SRS System, Repair|Page 18441 > < Cable Harness SRS System, Repair|Page 18439
Page 6
background image

Reinstalling and checking

Secure the new SRS cable next to the old cable using a tie strap or similar.

Reinstall the connectors.

Reconnect the battery. See  Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting 

Turn the ignition to position 2.

Check the SRS system to ensure that the warning lamp comes on and stays on while the SRS system performs a self-test. The lamp must go out after a
few seconds. If not, perform fault-tracing.

If everything is working, reinstall other components.

Test drive the vehicle.

Cable Harness SRS System, Repair|Page 18441 > < Cable Harness SRS System, Repair|Page 18439